Where Are The Fuses In A Microwave?

What happens when a fuse blows in a microwave?

When a short circuit occurs, the current through the fuse soars; the higher current means more heat, and the wire in the fuse melts, breaking the circuit.

Basically, then, a blown fuse in a microwave is the result of a surge in the current.

This surge could result from several causes..

Do microwaves have a reset button?

Locate the “Clear/Off” button on the front of the microwave. Hold it down for 3 to 5 seconds until the “LOC” error on the display disappears, or the timer or cooking time on the display resets.

What does a microwave fuse look like?

Most microwave fuses look like the one pictured to the left. They are usually an inch or two long. Each end is metallic and the center is either ceramic or glass. To get to the fuse, remove the outer cabinet of the unit, which is usually held in place with a few screws.

Are microwaves worth repairing?

Repair or Replace Microwave A replacement appliance costs about $100 and should work for at least seven to 10 years. If your microwave is relatively new and the repair costs less than replacing it, the fix is worth it. In general, the problems worth fixing include: No light when the door opens or while cooking.

How many years does a microwave last?

The average microwave oven lasts about seven years with normal use, and even less with heavy use and poor maintenance. A large family may find themselves replacing their appliance every four to five years as they become more reliant on its use to heat up snacks and leftovers, or to defrost meals.

How can you tell if a ceramic fuse is blown?

A homeowner can determine if a glass fuse in blown by performing a visual inspection and looking for a break in the thin wire and a brown discoloration in the center of the fuse. A ceramic fuse, however, shows no damage upon visual inspection. Testing a ceramic fuse is the only way to tell if the fuse has blown.

How many fuses are in a microwave?

Your microwave may have two types of fuse. The line fuses are usually familiar ceramic tubes, about 1¼ inches (3 cm) long. The thermal cutoff fuses are typically squat black cylinders with two prongs on the same side. Their exact location depends on your model, but check behind the control panel.

Are there fuses in microwaves?

Microwave ovens use one or more thermal cut-outs, sometimes called thermal fuses, to protect the oven from overheating. They are located inside of the cabinet, often near the oven cavity or the magnetron.

What fuse to use in a microwave?

Microwave Fuse Ceramic Fuse Cartridge Fuse 20 Amp 250V Slow-Blow Compatible and Universal Replace for GE WB27X10388 and Whirlpool Kenmore Other Microwave 5 PCS.

Can I replace a 15 amp fuse with a 20 amp fuse?

Once installed, the adapter bases are quite hard to remove. Thus, you are prevented from mismatching the fuse size when replacing a blown fuse. For example, a 20-amp fuse will not fit into an Edison fuse socket fitted with a 15-amp adapter base. These fuses will have “Type S” printed on the face of the fuse.

Why did my microwave suddenly stop working?

Problem with the ceramic fuse Another cause of the problem of microwave stopped working, no power could be the ceramic fuse. If the microwave is not starting and display is also blank then ceramic fuse may be defected. … Unplug the microwave and then access the fuse from inside the cabinet which is near the power cord.

When should you replace or replace a microwave?

Repair or Replace Microwave A replacement appliance costs about $100 and should work for at least seven to 10 years. If your microwave is relatively new and the repair costs less than replacing it, the fix is worth it. In general, the problems worth fixing include: No light when the door opens or while cooking.

Can I use any 20 amp fuse for my microwave?

Answer Lisa, Yes, the 20 amp fuse WB2X3910 would be the be the correct fuse for your GE microwave.

How do I know if my microwave fuse is blown?

It’s easy to tell if a glass fuse is blown; it will show scorch marks, and the filament will be melted. To check a ceramic fuse, use an ohmmeter or continuity tester. With an ohmmeter or multimeter, you should see a reading close to zero ohms if the fuse is intact, or infinite if it’s blown.

When should a microwave be replaced?

Over-the-range microwaves are built into the cabinetry and bolted to a wall, so replacing one that conks out is no simple chore. To avoid replacing yours more than about once every 10 years—which is how long most manufacturers tell us they should last—you’ll want to take good care of it.